Addionics Reports 3.5x Cycle Life in Cylindrical Cells Tested at Avrion Battery Labs, Solving Battery Degradation While Operating Continuously at High Rate
Addionics Reports 3.5x Cycle Life in Cylindrical Cells Tested at Avrion Battery Labs, Solving Battery Degradation While Operating Continuously at High Rate
CUPERTINO, Calif.--(BUSINESS WIRE)--Addionics, a developer of 3D porous current collectors for lithium-ion batteries, announced results from a case study conducted at Avrion Battery Labs showing that Addionics architecture delivered 3.5 times the cycle life and faster capacity recovery during rest, gains attributed to improved electrolyte and salt mobility inside the cell. These results demonstrate that Addionics is solving one of the biggest challenges related to battery degradation in the industry, uneven salt distribution under sustained cycling, enabling an always-on AI and autonomy industry.
The cells incorporating Addionics current collectors reached approximately 3.5 times the number of cycles before end of life, defined as 80% state of health, compared with reference cells using conventional current collectors. During rest, Addionics cells recovered in less than 2 hours initially and less than 12 hours by cycle 200, whereas reference cells required more than 48 hours after the first 20 cycles. These results are consistent with faster equilibration of electrolyte salt concentration.
Many established lithium-ion battery applications, including phones, laptops and cars, allow periods of rest or slower charging and discharging. Autonomous vehicles, humanoid robots and low Earth orbit (LEO) satellites increasingly demand sustained operation with limited opportunities for rest. In these applications, downtime can reduce availability and carry substantial operational costs.
The Avrion Labs case study demonstrates the potential of Addionics’ porous current collectors to support these demanding operating profiles by extending cycle life and reducing the time needed for recovery during rest. Avrion Labs provided the experimental platform for the study, including successful roll-to-roll electrode coating and fabrication of the graphite/NMC 18650 cylindrical cells. Testing used ultra-high precision coulometry (UHPC) equipment alongside Gamry instrumentation to track cycling performance and electrochemical impedance. Bringing cell fabrication and precision characterization together at Avrion Labs enabled Addionics to evaluate collector architecture in a practical wound-cell format.
Addionics current collectors can reduce the relaxation time of lithium diffusion by hundreds to thousands of times by reducing the diffusion distance. Any reduction in diffusion length has a squared effect on relaxation time according to a simplified diffusion model: where t is a characteristic relaxation time, L is diffusion length and D is the effective salt diffusion coefficient. The same mechanism is expected to apply whether concentration gradients form along the length of the cell or across its layers. This reduction in diffusion time is expected to be even more significant in larger format cells.
Discharge capacity and resistance relaxation results
Cells incorporating Addionics current collectors demonstrated longer cycle life and less capacity recovery after rest. These responses are consistent with reduced accumulation of reversible salt concentration gradients during cycling for cells with Addionics current collectors.
Together, the capacity and HFI responses support faster salt concentration relaxation with porous current collectors. Direct salt distribution measurements are planned to further test this mechanism.
Shortening electrolyte redistribution pathways
Sustained cycling with limited rest can leave salt unevenly distributed inside a cell due to limited electrolyte and salt ion mobility. In thick, high-loading electrodes, sustained cycling can cause concentration gradients to grow rapidly, leading to lithium plating on the anode. In addition, electrolyte motion induced salt inhomogeneity (EMSI) can develop when electrode expansion and contraction exacerbate salt concentration gradients due to the restricted movement of electrolyte. Both mechanisms are caused by kinetic limitations of electrolyte movement and salt concentration gradient relaxation. Addionics’ current collectors are designed to mitigate these limitations by reducing diffusion distance to improve the cell’s performance.
Repeated cycling can redistribute salt over centimeter-scale distances, increasing resistance and reducing accessible capacity. Published work from Johannes Wandt (BMW AG and University of Agder) and from Jeff Dahn (Dalhousie University) with collaborators at Tesla has linked EMSI to capacity loss and localized lithium plating in large-format and silicon-containing cells. [1, 2] Conventional solid metal foil current collectors block direct electrolyte transport across the current collector, leaving longer pathways for redistribution within the jelly roll. Addionics’ porous architecture introduces through-plane pathways through the current collector, allowing electrolyte and salt to redistribute across electrode layers. The engineering objective is to shorten the distance over which concentration gradients must relax. Addionics and Avrion plan follow-up work to confirm this, with the mechanism findings to be shared in a technical note.
Implications for battery engineering
The results support further development of current collector architecture as a way to manage internal electrolyte transport. This approach is relevant to applications with repeated cycling and limited rest, including robotics and autonomous fleets. It also motivates testing under other transport-limited conditions, such as low temperatures, larger cell formats and thicker electrodes. At Avrion Labs, Addionics tested performance in 18650s down to -10 °C, where improved performance at high rates and low temperatures were observed.
Cell design and test conditions
Two groups of 18650 cylindrical cells were fabricated using NMC811 cathodes and graphite anodes: a control group with conventional current collectors and a group incorporating Addionics 3D porous current collectors. The cells were evaluated under the following conditions.
Property |
Value |
Cell format and C/3 capacity |
18650 cylindrical; 2.7 Ah |
Cathode and anode |
NMC811 / graphite |
Cathode single-side reversible areal capacity |
4.5 mAh/cm² |
N/P ratio |
1.1 |
Voltage window |
2.8–4.2 V |
Charge and discharge rates |
1C / 1C |
Test temperature |
25 °C |
Electrolyte |
1.2 M LiPF₆ in EC:EMC:DMC (25:5:70 wt%) + 2% VC |
Electrolyte fill factor |
1.3 × total pore volume |
Every 20 cycles, cells rested for 48 hours while periodic electrochemical impedance spectroscopy (EIS) tracked HFI. The procedure was inspired by the cylindrical-cell EMSI study by Jeff Dahn and collaborators. [2]
The Business Use Case
For autonomous taxis and electric fleets, battery performance directly affects vehicle cost and revenue-generating uptime. Addionics’ illustrative model shows that expanding the usable battery window from 60% to 80% could deliver a third more usable energy, or meet the same energy requirement with approximately 25% less battery capacity. Assuming $50,000 vehicles with batteries representing 35% of cost, the smaller packs could save about $4.4 million across 1,000 autonomous taxis. In a separate space example, extending a $5 million satellite’s operating life from five to six years would add a productive year without another build or launch, improving the return on an asset already in orbit.
About Addionics
Addionics is redefining battery performance through advanced smart metal architecture. The company’s proprietary Smart 3D Porous Current Collectors replace conventional flat metal foils with an engineered three-dimensional structure that transforms how batteries manage current, heat, and mechanical stress from within the cell. Compatible with existing and emerging battery chemistries and manufacturing processes, Addionics’ technology enables higher energy density, faster charging, greater power capability, longer lifetime, improved safety, and more efficient manufacturing. As the world transitions to an AI-driven, always-on future, Addionics is building the battery architecture designed to power the next generation of autonomous systems, robotics, EVs, defense and aerospace.
About Avrion Battery Labs
Avrion Battery Labs Inc. is a cell research and development partner providing materials evaluation, electrode fabrication, cell prototyping and cell testing services from its facility in Bedford, Nova Scotia, working in coin, pouch and cylindrical formats across a range of chemistries. Customers engage Avrion at any stage of the process, from evaluating a single material through to validated cells. For more information, visit www.avrionlabs.com
Research references
[1] Solchenbach et al. Electrolyte motion induced salt inhomogeneity – a novel aging mechanism in large-format lithium-ion cells. Energy & Environmental Science 17, 7294–7317 (2024). DOI 10.1039/D4EE03211J
[2] Donais et al. Electrolyte Motion Induced Salt Inhomogeneity in Si-Containing Cylindrical Cells – A Case Study. Journal of The Electrochemical Society 173, 050519 (2026). DOI 10.1149/1945-7111/ae4b6e
Contacts
Propel Strategic Communications
DeeDee Rudenstein, 267-521-9654
drudenstein@propelsc.com

