-

Yamaha Executives Promote Hybrid Solution of Electrification and Biofuels, Ask for Improved E15 Labeling During 2022 American Boating Congress

WASHINGTON--(BUSINESS WIRE)--Yamaha U.S. Marine Business Unit executives joined 225 representatives from the boating and fishing industries in Washington D.C. for the 2022 American Boating Congress (ABC), May 11-13. During the three-day event, Yamaha leaders conducted 70 meetings on Capitol Hill educating legislators about the challenges of electrification in boating, the need to support research and approval of biofuels, and requesting improved labeling for E15 fuel through the Consumer Protection and Fuel Transparency Act (H.R. 7731). They also advocated for the passage of the PREPARE Act (H.R. 3207/S.1621), which would allow small businesses the ability to prepare for natural disasters by investing in disaster-resilient infrastructure.

“Yamaha and the marine industry have a responsibility to conserve air, land and water resources for the future, which will mean achieving carbon neutrality with our products. Electric power is not a complete solution to reach carbon neutrality for several reasons, but the primary issue is the energy density gap between batteries and gasoline,” said Martin Peters, Division Manager, Marine External Affairs, Yamaha U.S. Marine Business Unit. “A one-size-fits all solution will not succeed. The marine industry’s mid-term future will include more second and third-generation biofuels, which will require research, development and swift regulatory support for approval, transport and distribution. The marine industry needs to partner with the government for support on regulatory approvals as we strive for a carbon neutral future.”

Many transportation companies plan to reach carbon neutrality through electric products. In 2021, Yamaha Marine introduced HARMO®, a clean, quiet, environmentally friendly electric boat control system that serves as the foundation for future electric-powered products from Yamaha. Though a good solution for specific applications in small, light-weight vessels, Yamaha executives suggested HARMO is not appropriate for higher horsepower outboard applications.

“The issue is the energy density gap between batteries and gasoline. Batteries are heavier, require more energy and cost more to power a boat. Gasoline has dramatically more energy per unit than any type of battery available which creates the gap between the two energy sources,” continued Peters. “Because of the energy density gap, internal combustion will play a big role in the future of boating. Gasoline, of course, is currently the primary power source for marine internal combustion applications, but we will need to explore fuels that are themselves carbon neutral.”

During the ABC, the marine industry continued to educate legislators about the damages and corrosion ethanol fuel (E15) can cause in marine engine systems, and the need for better labeling at the gas pump. As an alternative, the industry presented butanol blends, specifically biobutanol, as a better solution for recreational marine engines and boats, causing less system damage while emitting even less carbon dioxide into the atmosphere. Yamaha, along with other marine industry organizations, also suggested a hybrid solution as the most efficient method to reach the goal of carbon neutrality; a combination of electrification, second and third-generation biofuels and other alternatives, such as hydrogen.

In addition, Yamaha and marine industry representatives advocated strongly for the passage of the PREPARE Act, which will allow the Small Business Administration (SBA) to make low interest, fixed rate loans of up to $500,000 to small businesses. These loans will give small businesses, which comprise roughly 84 percent of the U.S. marine industry, the ability to prepare for and survive future disasters, without closing their doors permanently.

For more information about Yamaha’s message during the 2022 ABC, click here.

Yamaha’s U.S. Marine Business Unit, based in Kennesaw, Ga., is responsible for the sales, marketing, and distribution of Yamaha Marine products in the U.S. including Yamaha Outboards, Yamaha WaveRunners®, Yamaha Boats, G3 Boats and Skeeter Boats. Supporting 2,400 dealers and boat builders nationwide, Yamaha is an industry leader in reliability, performance, technology and customer service.

REMEMBER to always observe all applicable boating laws. Never drink and drive. Dress properly with a USCG-approved personal floatation device and protective gear.

© 2022 Yamaha Motor Corporation, U.S.A. All rights reserved.

This document contains many of Yamaha's valuable trademarks. It may also contain trademarks belonging to other companies. Any references to other companies or their products are for identification purposes only and are not intended to be an endorsement

Contacts

Nicholas Genesi
Public Relations Manager
Yamaha U.S. Marine Business Unit
Mobile: (470) 898-7278
nicholas_genesi@yamaha-motor.com

Neal Wheaton
Wilder+Wheaton for
Yamaha U.S. Marine Business Unit
Mobile: (404) 317-0698
neal.wheaton@gmail.com

Yamaha U.S. Marine Business Unit


Release Versions

Contacts

Nicholas Genesi
Public Relations Manager
Yamaha U.S. Marine Business Unit
Mobile: (470) 898-7278
nicholas_genesi@yamaha-motor.com

Neal Wheaton
Wilder+Wheaton for
Yamaha U.S. Marine Business Unit
Mobile: (404) 317-0698
neal.wheaton@gmail.com

More News From Yamaha U.S. Marine Business Unit

Keep the Tennessee River Beautiful Launches River ROVer with Support from Yamaha Rightwaters™ and TVA

KNOXVILLE, Tenn.--(BUSINESS WIRE)--Keep the Tennessee River Beautiful® (KTnRB) recently launched the River ROVer™, an innovative cleanup initiative that removes floating litter and debris from waterways throughout the Tennessee River watershed. With support from Yamaha Rightwaters and the Tennessee Valley Authority (TVA), KTnRB combines remote-operated debris collection technology with a specially engineered vessel to expand cleanup efforts near dams and to educate communities about the far-rea...

Yamaha Introduces DockPoint® Pontoon, Integrating Joystick Outboard Control with Jet Thruster Technology

KENNESAW, Ga.--(BUSINESS WIRE)--Yamaha U.S. Marine Business Unit today announced DockPoint® Pontoon, a new integrated control system that combines Yamaha Helm Master® EX joystick outboard control with Jet Thruster technology to deliver full maneuverability for single-outboard pontoon boats. The integration allows captains to use one joystick to move forward or reverse, move laterally, rotate in place and make precise adjustments during docking and other low-speed maneuvers. “Integrating Helm Ma...

Yamaha Motor Adopts Recycled Aluminum Alloy for All-Aluminum DiASil Cylinders

IWATA, Japan--(BUSINESS WIRE)--Yamaha Motor Co., Ltd. (Tokyo: 7272) announced today that it will progressively switch the raw material used for its proprietary all-aluminum DiASil Cylinder from conventional virgin aluminum to recycled aluminum alloy. Once the switch has been completed for all products using DiASil Cylinders (scheduled for 2030), the transition is expected to reduce CO₂ emissions by approximately 47,000 tons annually (estimate). The DiASil Cylinder is an all-aluminum cylinder de...
Back to Newsroom