-

Tunable Linear ReDrivers from Diodes Incorporated Support Superior Levels of Signal Integrity on High-Speed DisplayPort 2.0 and HDMI 2.1 Interfaces

PLANO, Texas--(BUSINESS WIRE)--Diodes Incorporated (Nasdaq: DIOD) further reinforces its extensive linear ReDriver™ IC portfolio via the introduction of two new 3.3V-rated multi-lane active demux devices. These advanced ReDrivers address the demux needs now being set by the more graphically intense functions of mobile workstations, gaming PCs, and display dongles, while also still being fully optimized for the latest industrial computers and embedded systems hardware.

Supporting 13.5Gbps data rates, the 4-lane PI3DPX8112 is applicable to DisplayPort™ 2.0 implementations (as well as earlier generations of the protocol). Alongside this is the 4-lane PI3HDX12212, which has 12Gbps performance capabilities that mean it can manage HDMI 2.1, HDMI 2.0, HDMI 1.2, and HDMI 1.4 transmission modes.

Both the PI3HDX12212 and PI3DPX8112 ReDrivers feature pin strap adjustable 8-level receive equalizer settings on each of their two output paths, plus 4 settings for the adjusting of output flat gain and output swing parameters. Through these adjustments, it is possible for the signal integrity to be tuned in accordance with specific application requirements. Channel losses can then be compensated for and inter-symbol interference (ISI) removed to help extend channel reach. These devices are able to accept lower supply voltages than those achievable by the competition. They are protocol agnostic, transparent to channel link training, and deliver ultra-low latency operation.

The PI3DPX8112 and PI3HDX12212 are both supplied in 32-pin TQFN packages (with 3mm x 6mm dimensions) that are highly suitable for incorporation into space-limited environments. Both devices support a working temperature range of -40°C to +85°C. In 5,000 piece quantities, the PI3DPX8112 has a unit cost of $1.84 and the PI3HDX1221 has a unit cost of $2.22.

DisplayPort™ and the DisplayPort™ logo are trademarks owned by the Video Electronics Standards Association (VESA®) in the United States and other countries.

HDMI, High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries.

ReDriver™ is a trademark of Diodes Incorporated.

About Diodes Incorporated
Diodes Incorporated (Nasdaq: DIOD), a Standard and Poor’s SmallCap 600 and Russell 3000 Index company, delivers high-quality semiconductor products to the world’s leading companies in the consumer electronics, computing, communications, industrial, and automotive markets. We leverage our expanded product portfolio of discrete, analog, and mixed-signal products and leading-edge packaging technology to meet customers’ needs. Our broad range of application-specific solutions and solutions-focused sales, coupled with worldwide operations of 31 sites, including engineering, testing, manufacturing, and customer service, enables us to be a premier provider for high-volume, high-growth markets. For more information visit www.Diodes.com.

Contacts

Company Contact:
Diodes Incorporated
Emily Yang
SVP, Worldwide Sales and Marketing
P: 972-987-3900
Contact Us

Investor Relations Contact:
Shelton Group
Leanne K. Sievers
EVP, Investor Relations
P: 949-224-3874
E: lsievers@sheltongroup.com

Diodes Incorporated (P)

NASDAQ:DIOD

Release Versions

Contacts

Company Contact:
Diodes Incorporated
Emily Yang
SVP, Worldwide Sales and Marketing
P: 972-987-3900
Contact Us

Investor Relations Contact:
Shelton Group
Leanne K. Sievers
EVP, Investor Relations
P: 949-224-3874
E: lsievers@sheltongroup.com

More News From Diodes Incorporated (P)

High-Sensitivity Hall Effect Latch from Diodes Incorporated Enhances Position Sensing in Automotive Motor Control Systems

PLANO, Texas--(BUSINESS WIRE)--Diodes Incorporated (Diodes) (Nasdaq: DIOD) expands its AH371xQ series of automotive-compliant* Hall effect latches for motor control applications that need to operate at very low magnetic thresholds and bipolar switching behaviors. Featuring a proprietary Hall plate design, the AH3711Q is used for brushless DC (BLDC) motor control, valve operation, linear and incremental rotary encoders, and position-sensing functions. Vehicle applications include window power-li...

Four-Channel ReDriver™ from Diodes Incorporated Delivers 32Gbps Signal Integrity for Next-Generation Automotive Smart Cockpit Platforms

SANTA CLARA, Calif.--(BUSINESS WIRE)--Diodes Incorporated (Diodes) (Nasdaq: DIOD) introduces the PI3EQX32904Q, an automotive-compliant*, 32Gbps, four-channel linear ReDriver that optimizes signal integrity for high-speed protocols such as PCI Express® (PCIe®) 5.0 specification, SAS4, and CXL. Targeting smart cockpit architectures that integrate advanced driver-assistance systems (ADAS), infotainment systems, and instrument clusters into a single unit, the device addresses the growing signal-int...

PCIe® 7.0 Clock Generator from Diodes Incorporated Delivers Sub-30fs Jitter for Next-Gen AI Infrastructure

SANTA CLARA, Calif.--(BUSINESS WIRE)--Diodes Incorporated (Diodes) (Nasdaq: DIOD) introduces the PI6CG33A06, a six-output, ultra-low jitter clock generator designed to meet the demands of PCI Express® (PCIe®) 7.0 specification while maintaining compliance with all previous generations of the PCIe specification. Announced at PCI-SIG® Developers Conference, the device is targeted for servers, networking equipment, high-performance computing (HPC) systems, and data center platforms that underpin n...
Back to Newsroom