-

EPC’s 50 W, 12 V to 60 V eGaN® FET-based Boost Converter Provides an Efficient, Simple, Low-cost Solution for Laptop and PC Monitor Backlighting

A 50 W, 12 V to 60 V eGaN FET-based synchronous boost converter achieves 95.3% peak efficiency with low temperature rise with a simple, low-cost topology

EL SEGUNDO, Calif.--(BUSINESS WIRE)--EPC announces the availability of the EPC9162, a bi-directional buck or reverse-boost converter. This demonstration board features the 100 V EPC2052 for the synchronous converter, and the EPC2038 in the synchronous bootstrap FET circuit.

The EPC9162 is by default programmed as a boost converter operating at 12 V input to 60 V/50 W output. However, the board can also be operated as a buck converter at 48 V input to 12 V/60 W output. The fast-switching speed of eGaN FETs significantly reduces switching losses for higher efficiency operation. To make it simple for a power supply designer to easily replicate this design, all supporting materials for this board including schematic, bills of materials, and Gerber files are available on the EPC website.

The peak efficiency from 12 V to 60 V/0.85 A is 95.3% and the light load efficiency is 86% with only a 40°C temperature rise despite the small size of the eGaN FETs.

“In applications where light-load efficiency is critical, such as LED backlighting for laptops and monitors, the low switching losses of eGaN FETs provide high efficiency with very low temperature rise to prevent equipment overheating,” said Alex Lidow, CEO of EPC. “The synchronous boost topology is a simple, low-cost solution for power system designers.”

Price and Availability

The EPC9162 demonstration board is priced at $284.12 each and is available for immediate delivery from Digi-Key at https://www.digikey.com/en/products/detail/epc/EPC9162/15295925.

About EPC

EPC is the leader in enhancement mode gallium nitride (eGaN®) based power management. eGaN FETs and integrated circuits provide performance many times greater than the best silicon power MOSFETs in applications such as DC-DC converters, remote sensing technology (lidar), motor drives for eMobility, robotics, and drones, and low-cost satellites.

Visit our web site: www.epc-co.com

eGaN is a registered trademark of Efficient Power Conversion Corporation, Inc.

Contacts

Efficient Power Conversion
Renee Yawger
tel: +1.908.619.9678
email: renee.yawger@epc-co.com

Efficient Power Conversion Corporation, Inc.


Release Summary
EPC’s 50 W, 12 V to 60 V eGaN® FET-based Boost Converter Provides an Efficient, Simple, Low-cost Solution for Laptop and PC Monitor Backlighting
Release Versions

Contacts

Efficient Power Conversion
Renee Yawger
tel: +1.908.619.9678
email: renee.yawger@epc-co.com

Social Media Profiles
More News From Efficient Power Conversion Corporation, Inc.

Footprint Compatible Packaged GaN Family Expands to 150 V for Flexible Design of High-Power Density Applications

EL SEGUNDO, Calif.--(BUSINESS WIRE)--Footprint Compatible Packaged GaN Family Expands to 150 V for Flexible Design of High-Power Density Applications...

GaN ICs Shrink Motor Drives and Speed Time-to-Market for eMobility, Power Tools, Robotics, and Drones

EL SEGUNDO, Calif.--(BUSINESS WIRE)--EPC announces the availability of the EPC9176, a 3-phase BLDC motor drive inverter using the EPC23102 ePower™ Stage GaN IC with embedded gate driver function and two GaN FETs with 5.2 mΩ typical RDS(on). The EPC9176 operates from an input supply voltage between 20 V and 80 V and can deliver up to 28 Apk (20 ARMS). This voltage range and power level makes the solution ideal for a variety of 3-Phase BLDC motor drive applications with 36 V – 80 V input includin...

EPC Opens New Motor Drive Center of Excellence

EL SEGUNDO, Calif.--(BUSINESS WIRE)--EPC Opens New Motor Drive Center of Excellence...
Back to Newsroom