Milacron Pushes to Offer Highest Quality Solutions Through Technical and Methodical Approach

CINCINNATI--()--Milacron Holdings Corp. (NYSE: MCRN), a leading industrial technology company serving the plastics processing industry continues to serve the plastics industry through high-quality solutions. Milacron’s latest investments target technologies that will offer clarity and knowledge for our customers.

Milacron understands the demands of plastic processing based on the application, but we continue to push the limits on what our teams offer to our customers when suggesting the proper components for any operation.

Many of our adversaries attempt to present an equivalent to our barrel lining products, but we are striving to go a step beyond the previous archaic diagnostics processes and transform them into industry-leading standards to recommend the finest custom offerings based on the desires of each customer.

MODEL-BASED MANUFACTURING STRATEGY

Brand new technology at our facility in McPherson, Kansas allows us to maintain a pledge to excellence like no other. By digitizing all of our diagnostics processes, this unique component to our world-class facility allows us to approach any diagnostic problem efficiently and systematically. Through this, we can support quality assurance and minimize deviation while producing advanced and tailored manufacturing technology.

From this technology, we can analyze the value of screws and barrels in each application. Visual 3D reports that were unattainable help us communicate these improved solutions.

VALIDATION OF VENDORS FOR BARREL LINING OPTIONS STUDY

For injection molding and extrusion machinery, the endurance of the lining for the barrels and screws is critical. The duration of use for these components depends on the quality and a variety of factors in each manufacturing setting. Milacron is escalating our offerings for bi-metallic barrel linings by investing in rigorous experiments to identify the finest methods for our customers to capitalize on their purchases.

THE STUDY PROCEDURE

Milacron has been carrying out testing of Nickel and Tungsten Carbide barrel linings. We have devoted our time and resources to make sure that our teams present the highest-quality solutions from our globally acclaimed suppliers.

Our objective was to show the quality of what we believe to be the best Bi-Metallic Barrel Linings that we provide our clients, through G65A and G76 abrasion and erosion testing.

These tests were carried out in a domestic laboratory to identify the loss by gas-entrained solid particle erosion on the Nickel and Tungsten Carbide linings to simulate the production environments.

To perform these tests, we sliced 40” barrels in half and stripped each liner in 6” x 6”-sections to get a flat 2” x 2” flat testing surface. Each liner was tested in 6 intervals (the length of one barrel) to get an average value of the wear resistance.

THE RESULTS

These attempts have verified some global standards of industry knowledge, like that the wear life of tungsten carbide liners is the overall best method. This lining is increasing popular among complex applications like processing glass-filled resins.

We found that various liners that would be considered the same grade from leading suppliers have unique formulas. Those recipes can have an impact on the molding process.

We found a wide variance in the way the lining behaved during these tests. There is a balance required in the amount of Tungsten applied in the liner of the barrel. The wear resistance was measurably at a faster rate when testing liners with lower values of Tungsten in the liner. We did not expect to find that there is also a limit to the amount of tungsten that should be in the liner, as we found that too much tungsten would cause cracking during the process. We also found that the most expensive linings did not provide the most wear resistance in these tests.

LOOKING AHEAD FOR OUR CUSTOMERS

Milacron’s goal is to pass this knowledge onto our customers to advise our customers on the best investment for barrel lining for each unique application. Milacron plans to continue testing barrel linings from suppliers throughout the world, and comparing those results to our initial results.

Using data analytics collected through customers that have the M-Powered suite, we can continue to capitalize on this investment for our customers.

SUSTAINABLE CHOICES

As the use of re-engineered resins and regrind/scrap materials continue to gain momentum in the market, the investment for proper barrels, screws, barrel lining, and other components will continue to grow exponentially. This study is helping to understand how the barrel lining purchase of any customer will impact the wear life, as well as their part quality.

Milacron continues to push the boundaries of possibilities in plastics with breakthrough products from leading brands including Milacron, Mold-Masters, DME, Ferromatik, TIRAD, and CIMCOOL.

About Milacron

Milacron is a global leader in the manufacture, distribution, and service of highly engineered and customized systems within the plastic technology and processing industry. Milacron is the only global company with a full-line product portfolio that includes hot runner systems, injection molding, extrusion equipment, auxiliary equipment and a wide market range of advanced fluid technologies. Visit Milacron at www.milacron.com.

MCRN-IR

Contacts

Media Contact:
Lacy Wise
Corporate Communications Manager
Lacy_Wise@milacron.com
M: +1-513-410-3458

Investor Relations:
Bruce Chalmers
Milacron, Chief Financial Officer
Bruce_Chalmers@milacron.com
O: +1-513-319-7985

Contacts

Media Contact:
Lacy Wise
Corporate Communications Manager
Lacy_Wise@milacron.com
M: +1-513-410-3458

Investor Relations:
Bruce Chalmers
Milacron, Chief Financial Officer
Bruce_Chalmers@milacron.com
O: +1-513-319-7985