EL SEGUNDO, Calif.--(BUSINESS WIRE)--Although Apple Inc.’s iPhone line is a latecomer to the plastic party—with the company introducing its first polycarbonate-enclosed model just last week—the use of plastic resin in the cellphone market is already a multibillion-dollar business, with tremendous growth expected in the coming years.
The global market for molded plastic components used in cellphones is set to amount to $3.5 billion in 2013, up from $3.3 billion in 2012, according to IHS Chemical and technology research from IHS Inc. (NYSE: IHS). Plastic component revenue in cellphones will continue to rise in the future, growing by 27 percent from 2013 to reach $4.5 billion in 2017. This represents a $1.0 billion increase in just four years, as presented in the attached figure.
In terms of weight, total plastic resin usage in all cellphones—smartphones and other mobile handsets included—will increase to 336,000 metric tons in 2017, up from 282,000 metric tons in 2013.
“The plastic polycarbonate enclosure of the new iPhone 5c weighs just 14.2 grams, according to a recent IHS teardown,” observed Jagdish Rebello, Ph.D., senior director for consumer & communications at IHS. “With 20 million iPhone 5c smartphones forecast to be sold through the rest of 2013, this represents a total consumption of 283 metric tons of polycarbonate resin by just one device, in just one quarter. With the introduction of the 5c, Apple now is part of a rising wave of plastic in the smartphone market—and in the overall electronics business.”
Plastic is fantastic for smartphone makers
Apple’s decision to use plastic for the 5c’s enclosure was partly driven by a desire to offer a lower-priced smartphone that costs less to manufacture than previous members of the iPhone line. Plastic also allowed Apple to offer iPhones in a greater variety of colors than ever before. This push toward reduced cost and greater product differentiation reflects a larger trend in the cellphone market.
“Plastic components are becoming increasingly important in mobile handsets, and especially in smartphones,” said Kristin Squires, chemicals industry consultant with IHS. “Amid rising competition in the market, smartphone original equipment manufacturers (OEM) are seeking ways to drive down costs for raw materials, manufacturing and assembly. Plastic offers multitude ways to cut these expenses.”
Meanwhile, OEMs are attempting to differentiate their products by creating smartphones that are aesthetically appealing to their consumers.
“Plastic components allow for a great deal of design flexibility as well as product and functional differentiation,” said Don Bari, senior director, chemicals consulting, for IHS. “OEMs are using a plastic resin called acrylonitrile butadiene styrene (ABS), along with polycarbonate and ABS/polycarbonate blends. By using these plastics in the product housings, the OEMs can offer lightweight products that are visually attractive to customers.”
Rebello agrees. “The well-designed plastic housing allows Apple to easily offer the iPhone 5C in a range of colors, and provides Apple with tremendous manufacturing and assembly cost savings in terms of simplifying the assembly of the final product,” he added. “The precision-machined metal housing in the iPhone 5s—as well as the earlier-generation iPhone 5—requires significantly higher machining tolerances and assembly costs. Apple’s return to plastic casings shows that plastics are here to stay.”
Plastic plethora
The cellphone market offers opportunities for a large variety of plastic resins including ABS, polycarbonate, nylon and polymethyl methacrylate (PMMA). ABS and polycarbonate are both attractive materials for exterior components due to their strength and aesthetic appeal. Polycarbonate cellphone housing may have a chemical coating to improve its scratch-resistance.
In addition to enclosures, plastics are used in a wide range of cellphone applications ranging from mounting brackets and display frames to display backlight guides, insulator sheets and vibration cushions. And as low-end smartphones start to become increasingly adopted in the emerging markets of the world, IHS projects that plastics will increasingly be used for a wide range of mechanical and optical components in the mobile handset and smartphone market. IHS forecasts that ABS and polycarbonate demand for cellphone components will grow at compound annual growth rates of 7.0 percent and 4.5 percent, respectively, through 2017.
Plastic takes over in electronics
The rising use of plastics in cellphones is part of a much larger trend of increasing utilization of the material in a wide range of electronic products, including consumer and computing devices like LCD TVs, PCs, printers and media tablets, and appliances such as refrigerators, washing machines and microwave ovens.
IHS has determined that the electronics industry will consume nearly 16.0 million metric tons of plastic resin in 2017, up from 12.8 million in 2012.
About IHS (www.ihs.com)
IHS (NYSE: IHS) is the leading source of information, insight and analytics in critical areas that shape today's business landscape. Businesses and governments in more than 165 countries around the globe rely on the comprehensive content, expert independent analysis and flexible delivery methods of IHS to make high-impact decisions and develop strategies with speed and confidence. IHS has been in business since 1959 and became a publicly traded company on the New York Stock Exchange in 2005. Headquartered in Englewood, Colorado, USA, IHS is committed to sustainable, profitable growth and employs approximately 8,000 people in 31 countries around the world.
IHS is a registered trademark of IHS Inc. All other company and product names may be trademarks of their respective owners. Copyright © 2013 IHS Inc. All rights reserved.
An IHS expert on this topic is available for live and recorded television interviews today from our studio in Santa Clara, Calif., which is equipped with a VideoLink ReadyCam system. Call or e-mail our press contacts below to set up an interview.
