BlackLight Power, Inc. Announces the Game Changing Achievement of the Generation of Millions of Watts of Power from the Conversion of Water Fuel to a New Form of Hydrogen

Loading media player...

BlackLight Power Plasma

CRANBURY, N.J.--()--BlackLight Power, Inc. (BLP) today announced that it has produced millions of watts of power with its breakthrough Solid Fuel-Catalyst-Induced-Hydrino-Transition (SF-CIHT) patent pending technology in its laboratories.

Using a proprietary water-based solid fuel confined by two electrodes of a SF-CIHT cell, and applying a current of 12,000 amps through the fuel, water ignites into an extraordinary flash of power. The fuel can be continuously fed into the electrodes to continuously output power. BlackLight has produced millions of watts of power in a volume that is one ten thousandths of a liter corresponding to a power density of over an astonishing 10 billion watts per liter. As a comparison, a liter of BlackLight power source can output as much power as a central power generation plant exceeding the entire power of the four former reactors of the Fukushima Daiichi nuclear plant, the site of one of the worst nuclear disasters in history.

Our safe, non-polluting power-producing system catalytically converts the hydrogen of the H2O-based solid fuel into a non-polluting product, lower-energy state hydrogen called “Hydrino”, by allowing the electrons to fall to smaller radii around the nucleus. The energy release of H2O fuel, freely available in the humidity in the air, is one hundred times that of an equivalent amount of high-octane gasoline. The power is in the form of plasma, a supersonic expanding gaseous ionized physical state of the fuel comprising essentially positive ions and free electrons that can be converted directly to electricity using highly efficient magnetohydrodynamic converters. Simply replacing the consumed H2O regenerates the fuel. Using readily-available components, BlackLight has developed a system engineering design of an electric generator that is closed except for the addition of H2O fuel and generates ten million watts of electricity, enough to power ten thousand homes. Remarkably, the device is less than a cubic foot in volume. To protect its innovations and inventions, multiple worldwide patent applications have been filed on BlackLight’s proprietary technology.

This breakthrough transformational power technology can be witnessed in a live demonstration hosted by BlackLight of on January 28th at 11 AM. Details and updates will be posted at the company website (http://www.blacklightpower.com/). Those interested in attending can contact BlackLight to preregister for this limited availability event.

Applications and markets for the SF-CIHT cell extend across the global power spectrum, including thermal, stationary electrical power, motive, and defense. Given the independence from existing infrastructure, grid in the case of electricity and fuels in the case of motive power, the SF-CIHT power source is a further game changer for all forms of transportation: automobile, freight trucks, rail, marine, aviation, and aerospace in that the power density is one million times that of the engine of a Formula One racer, and ten million times that of a jet engine. The SF-CIHT cell uses cheap, abundant, nontoxic, commodity chemicals, with no apparent long-term supply issues that might preclude commercial, high volume manufacturing. The projected cost of the SF-CIHT cell is between $10 and $100/kW compared to over one hundred times that for conventional power sources of electricity.

BlackLight’s previously reported pioneering solid fuels and CIHT electrochemical cell use the same catalyst as the newly invented SF-CIHT cells, and they served as a model for Dr. Mills to invent the breakthrough plasma producing SF-CIHT cell. These background technologies have been validated by industry. BlackLight’s results of multiples of the maximum theoretical energy release for representative solid fuels was replicated at Perkin Elmer’s Field Application Laboratory at their facility using their commercial instrument. Moreover, our advanced CIHT electrochemical cell was independently replicated offsite as well.

“We at The ENSER Corporation have performed about thirty tests at our premises using BLP’s CIHT electrochemical cells of the type that were tested and reported by BLP in the Spring of 2012, and achieved the three specified goals,” said Dr. Ethirajulu Dayalan, Engineering Fellow, of The ENSER Corporation. “We independently validated BlackLight’s results offsite by an unrelated highly qualified third party. We confirmed that hydrino was the product of any excess electricity observed by three analytical tests on the cell products, and determined that BlackLight Power had achieved fifty times higher power density with stabilization of the electrodes from corrosion.” Dr. Terry Copeland, who managed product development for several electrochemical and energy companies including DuPont Company and Duracell added, “Dr. James Pugh (then Director of Technology at ENSER) and Dr. Ethirajulu Dayalan participated with me in the independent tests of CIHT cells at The ENSER Corporation’s Pinellas Park facility in Florida starting on November 28, 2012. We fabricated and tested CIHT cells capable of continuously producing net electrical output that confirmed the fifty-fold stable power density increase and hydrino as the product.”

The disclosure of one of BlackLight’s patent application that was recently-filed worldwide, its 10 MW electric SF-CIHT cell system engineering design and simulation, high-speed video of millions of watts of supersonically expanding SF-CIHT cell plasma, The ENSER Corporation and Dr. Terry Copeland validation reports on the prior generation CIHT electrochemical cells, and the Perkin Elmer report on solid fuels are publicly available on BlackLight’s webpage (http://www.blacklightpower.com/). Technical papers by BlackLight providing the experimental tests of plasma to electric conversion, results of excess energy production from solid fuels, results of continuous electricity production at fifty times higher power density than prior generation CIHT electrochemical cells, and the detailed chemistry and identification of Hydrinos by ten analytical methods that laboratories can follow and replicate are given at http://www.blacklightpower.com/.

About BlackLight Power

BlackLight Power, Inc. is the inventor of a new primary energy source applicable to essentially all power applications such as thermal, electrical, automotive, trucking, rail, marine, aviation, aerospace, and defense. The BlackLight Process, the power source, is the process of releasing the latent energy of the hydrogen atom by forming Hydrinos. The SF-CIHT cell was invented by Dr. Mills to release this energy directly as electricity from water as the only source of fuel.

For more information, please visit http://www.blacklightpower.com/

Glossary:

BlackLight Process: A novel chemical process invented by Dr. Mills causing the latent energy stored in the hydrogen atom to be released as a new primary energy source.

Hydrino: Hydrinos are a new form of hydrogen theoretically predicted by Dr. Mills and produced and characterized by BLP. Hydrinos are produced during the BlackLight Process as energy is released from the hydrogen atom as the electron transitions to a lower-energy state resulting in a smaller radius hydrogen atom. The identity of the dark matter of the universe as Hydrinos is supported by BlackLight’s spectroscopic and analytical results as well as astrophysical observations.

SF-CIHT Cell: Each SF-CIHT cell comprises two electrodes that confine a highly electrically conducive H2O-based solid fuel that serves as a source of reactants to form Hydrinos. A low-voltage, very high current (about one thousand times that of household currents) ignites the water to form hydrinos and cause a burst of plasma power of millions of watts that can be directly converted to electricity using proven plasma to electric power conversion technology such as a magnetohydrodynamic converter.

Magnetohydrodynamic Converter: An electrical generator that uses no moving parts. It comprises a magnet as in a conventional generator, but the conductor that moves in this case is the flowing plasma that produces a voltage at a pair of electrodes that are perpendicular to both the direction of plasma flow and the magnetic field of the magnet.

Contacts

BlackLight Power, Inc.
Media:

Beata Stepien, 609-490-1090 Ex 125
Assistant for Dr. Randell L. Mills
bstepien@blacklightpower.com

Release Summary

BlackLight Power, Inc. (BLP) produced power with its breakthrough SF-CIHT cell, a new energy technology. Uses water as fuel to make Hydrinos. Reports validation at third party location.

Contacts

BlackLight Power, Inc.
Media:

Beata Stepien, 609-490-1090 Ex 125
Assistant for Dr. Randell L. Mills
bstepien@blacklightpower.com