Arizona Metals Corp’s Kay Mine Drilling Expands Mineralized Zone with Intersects of 24 m @ 5.0% Cu, 0.6 g/t Au, 1.0% Zn, and 23 g/t Ag; 53 m @ 2.9 g/t Au, 0.5 % Cu, 3.4% Zn, and 36 g/t Ag; and 11.4 m @ 5.9% Cu, 5.8 g/t Au, 3.2% Zn, and 185 g/t Ag

Figure 1. Section view looking north. See Tables 1 and 2 for additional details. The true width of mineralization is estimated to be 50% to 97% of reported core width, with an average of 80%. (Graphic: Business Wire)

TORONTO--()--Arizona Metals Corp. (TSX.V:AMC, OTCQX:AZMCF) (the “Company” or “Arizona Metals”) is pleased to announce the results of an additional ten drill holes at the recently discovered gold-rich zone of open-ended mineralization at the Kay Mine, in areas previously untested by historic drilling or exploration.

Drilling Highlights

  • Hole KM-21-40 intersected 24 m at a grade of 5.0% Cu, 0.6 g/t Au, 1.0% Zn, and 23 g/t Ag, including a higher-grade interval of 8.1 m grading 7.6% Cu, 0.4 g/t Au, 0.4% Zn, and 27 g/t Ag. At 30 m farther downhole, Hole 40 also intersected 53 m at a grade of 2.9 g/t Au, 3.4% Zn, 0.5% Cu, and 36 g/t Ag, including two separate higher grade intervals of 7.2 m grading 7.7 g/t Au, 8.3% Zn, 1.1% Cu and 89 g/t Ag, as well as 3.8 m grading 10.9 g/t Au, 9.5% Zn, 1.5% Cu, and 25 g/t Ag. This hole extends the high-grade mineralization encountered in Hole 28 approximately 65 m to the south at a similar depth.
  • Hole KM-21-41 intersected 97 m at a grade of 1.0% Cu, 1.5 g/t Au, 2.7% Zn, and 41 g/t Ag, including higher grade intervals of 11 m grading 5.3 g/t Au, 1.0% Cu, 8.2% Zn, and 106 g/t Ag, as well as 11.4 m grading 5.9% Cu, 5.8 g/t Au, 3.2% Zn, and 185 g/t Ag. This hole extends the high-grade mineralization encountered in both Holes 24 and 26 by approximately 60 m up-plunge and 20 m to the north demonstrating excellent lateral and vertical continuity.
  • Hole KM-21-43 intersected 17.1 m at a grade of 1.8% Cu, 0.2 g/t Au, 0.1% Zn, and 8 g/t Ag, including a higher grade interval of 1.8 m grading 6.3% Cu, 0.6 g/t Au, and 25 g/t Ag. This hole extends the new mineralized zone approximately 50 m to the north of the high-grade mineralization encountered in Holes 24 and 26.
  • Hole KM-21-44 intersected 23.9 m at a grade of 1.0 g/t Au, 0.3% Cu, 2.5% Zn and 18 g/t Ag, including a higher grade interval of 2.6 m grading 2.1 g/t Au, 8.0% Zn, 0.2% Cu, and 39 g/t Ag. This zone extends the new mineralized zone approximately 40 m up-plunge of Hole 18A.
  • Hole KM-21-32 intersected 9.4 m at a grade of 1.5 g/t Au, 0.6% Cu, 2.0% Zn, and 46 g/t Ag. This hole extends the new mineralized zone approximately 30 m up-plunge of Hole 18A. At approximately 185 m vertical depth, Holes 32 and 44 are the shallowest drill intercepts in the deposit, demonstrating continued vertical continuity. Mineralization remains open upward toward the surface, with assays pending for Hole 46 in this same area.
  • Hole KM-21-38 intersected 8.7 m at a grade of 1.7 g/t Au, 3.9% Zn, 0.1% Cu, and 61 g/t Ag, including a higher grade interval of 5.2 m grading 2.4 g/t Au, 5.7 % Zn, 0.1% Cu, and 88 g/t Ag. This hole extends mineralization by approximately 30 m to the north of the high grade encountered in Hole 21A.
  • Hole KM-21-35 intersected 5.5 m at a grade of 1.3 g/t Au, 0.9% Cu, 1.7% Zn, and 58 g/t Ag. This hole has extended the mineralization encountered in Hole 25B by approximately 80 m to the south, also in an area previously untested by historic exploration.
  • Hole KM-21-34 intersected 4.6 m @ 1.7 g/t Au, 0.3% Cu, 0.9% Zn, and 46 g/t Ag. Hole 34 is in the North Zone of mineralization, and extends mineralization approximately 50 m below Hole 6 (13.5 m @ 1.0% Cu, 0.6 g/t Au, 1.23% Zn, 46 g/t Ag).

These newly defined, wide, high-grade intervals continue to demonstrate the potential to add a significant tonnage of gold-copper-zinc-silver mineralization outside of the historic resource. Historic exploration by Exxon Minerals during the 1970s resulted in a model showing two discrete mineralized zones, ‘North’ and ‘South’, separated by 100 m on strike. Drilling by Arizona Metals continues to indicate that these zones are in fact conjoined and not distinct.

Structural Mapping Program

In September 2021, the Company initiated a detailed surface structural mapping program performed by associates of technical advisor Dr. Mark Hannington, to update and supplement structural mapping completed in 2019. The results of the mapping program will be combined with core logging data to refine drill targets at pads 4, 5, and 6. These pads will test for extensions of the Kay Mine mineralization approximately 500 m north and 300 m south of the main mineralized body. Mapping will also refine drill targets at the Central and West targets, located approximately 0.5 km and 1.3 km, respectively, west of the Kay deposit, as drilling is anticipated to commence at these targets in Q1 2022.

Marc Pais, CEO, commented “The ten drill holes released today continue to demonstrate the richness and size potential of the Kay Mine system. Virtually all holes drilled to date at Kay have intersected semi-massive to massive sulphide mineralization, with assays pending on ten more holes, and three holes currently underway.

In Phase 2 the deposit has been drilled to 775 m below surface (in Hole 27) along a strike length of 300 m and drilling continues to expand Kay mineralization in all directions with assays pending on a number of holes up to 850 m below surface. Holes 40 and 41 were drilled to test above and below the high-grade intervals encountered in Holes 24, 26, and 28. Both Holes 40 and 41 demonstrate exceptional vertical continuity of thickness and grade in this portion of the deposit. Drilling is currently underway with three drill rigs to test for further extensions of high-grade mineralization, both laterally and targeting depths below 900 m.

Our geological model, especially the modeled orientation of mineralized zones, is evolving rapidly as we drill, and is confirming a deposit considerably larger than reported historically. Our drill program is evolving to reflect these changes, and we are currently drill testing a number of new targets both at depth and near surface.”

Covid-19 Monitoring and Mitigation Procedures

The Company’s drill contractor, Boart Longyear, has instituted Covid-19 monitoring procedures for all drill crew members, including daily temperature and symptom checks. Arizona Metals Corp will be provided with daily health tracking updates for the drill crews and has also instituted its own social distancing policies and provided a guidance manual for employees at site.

Table 1. Results of Phase 2 Drill Program at Kay Mine, Yavapai County, Arizona. The true width of mineralization is estimated to be 50% to 97% of reported core width, with an average of 80%.

Analyzed Grade

Hole ID

From m

To m

Length m

Cu %

Au g/t

Zn %

Ag g/t

Pb %

Vertical

Depth

Below

Surface m

KM-21-17

429.5

449.9

20.4

1.81

1.10

1.20

21.2

0.17

300

including

429.5

434.0

4.6

4.61

1.73

1.91

29.1

0.24

 

including

432.7

434.0

1.4

0.52

6.81

8.29

40.0

1.10

 

KM-21-17

504.4

505.4

0.9

1.19

4.73

0.05

9.0

0.00

356

KM-21-18

404.3

429.8

25.5

0.35

0.86

1.71

15.8

0.23

255

including

408.6

410.6

2.0

0.50

2.22

7.25

64.4

0.82

 

including

424.9

427.3

2.4

1.60

2.59

3.16

18.0

0.52

 

KM-21-18A

391.4

423.8

32.5

1.09

0.62

1.25

17.6

0.15

233

including

393.3

395.8

2.4

9.57

2.83

2.72

40.9

0.28

 

KM-21-19

377.8

378.3

0.5

3.39

5.59

6.83

128.0

0.63

337

KM-21-20

442.7

443.6

0.9

2.56

0.52

3.52

18.5

0.14

362

KM-21-20

456.0

458.1

2.1

1.49

0.35

0.14

6.0

0.04

370

KM-21-21

452.6

495.5

42.8

0.80

0.78

1.52

15.1

0.15

362

including

488.7

493.5

4.8

0.26

2.50

6.13

27.6

0.54

 

KM-21-21A

422.0

431.4

9.4

1.17

0.57

2.25

8.6

0.36

362

KM-21-21A

439.1

502.1

63.0

0.45

1.28

3.14

58.8

0.77

366

including

465.0

481.9

16.9

0.52

2.45

4.05

80.9

0.99

 

KM-21-23

394.4

401.4

7.0

0.36

0.93

1.94

13.5

1.17

313

KM-21-23

438.6

459.2

20.6

0.17

1.18

1.93

27.8

0.37

336

KM-21-24

501.2

592.1

90.8

0.45

1.33

3.42

44.3

0.41

470

including

501.2

521.7

20.4

1.34

1.70

6.35

113.1

0.66

 

including

520.9

521.7

0.8

1.75

16.50

9.55

574.0

1.22

 

including

575.9

592.1

16.2

0.16

2.50

6.00

44.4

0.79

 

including

588.7

590.4

1.7

0.47

9.98

23.70

18.2

0.13

 

KM-21-25

662.6

741.3

78.6

1.41

2.33

2.79

43.4

0.35

638

including

663.2

672.7

9.4

8.06

1.84

1.31

92.3

0.15

 

including

693.0

703.9

11.0

0.68

6.28

10.40

99.7

1.17

 

KM-21-25A

654.7

719.9

65.2

1.04

1.94

2.15

18.8

0.18

624

including

655.5

662.8

7.3

3.66

2.09

1.85

30.2

0.21

 

including

710.8

716.9

6.1

2.72

7.95

3.73

37.4

0.31

 

KM-21-25B

647.2

648.9

1.7

0.13

0.58

2.41

62.1

0.64

610

KM-21-25B

655.6

659.9

4.3

0.93

0.91

0.91

25.3

0.19

615

KM-21-25B

666.0

667.8

1.8

0.60

0.72

2.98

33.5

0.43

620

KM-21-25B

673.3

674.7

1.4

0.08

2.10

2.39

23.0

0.33

628

KM-21-25B

681.2

682.6

1.4

0.09

1.54

2.98

11.0

0.35

631

KM-21-26

506.7

582.8

76.0

0.79

1.61

4.23

32.6

0.54

480

including

511.1

526.1

14.9

0.73

1.78

9.68

43.3

0.77

 

including

573.8

582.8

9.0

4.02

6.06

3.32

18.2

0.19

 

KM-21-27

706.8

738.2

31.4

1.58

0.16

0.69

9.0

0.06

700

KM-21-27

764.4

777.4

13.0

2.85

0.48

0.17

8.4

0.02

775

KM-21-27A

666.3

769.4

103.1

0.79

1.06

1.90

35.8

0.42

678

including

666.3

687.0

20.7

3.21

1.39

1.26

19.4

0.20

 

including

706.4

724.6

18.3

0.69

2.69

4.70

92.2

1.21

 

including

752.9

763.8

11.0

0.07

1.07

4.68

95.3

0.98

 

KM-21-27B

665.8

762.9

97.1

1.31

1.62

3.21

31.7

0.40

660

including

702.0

723.0

21.0

0.87

4.56

9.03

81.5

1.10

 

including

723.0

738.2

15.2

4.97

0.36

0.42

18.7

0.05

 

KM-21-28

640.7

694.9

54.3

1.87

2.85

5.03

29.4

0.70

584

including

660.2

671.6

11.4

0.54

4.29

9.30

32.2

1.17

 

including

681.1

689.0

7.9

4.39

9.47

10.34

93.1

2.41

 

including

690.4

692.6

2.2

16.06

0.82

0.06

55.8

0.01

 

KM-21-29

393.0

393.8

0.8

0.43

1.54

4.92

9.0

0.21

235

KM-21-30

264.9

267.9

3.0

1.18

0.02

0.01

1.5

0.00

240

KM-21-32

316.4

320.0

3.7

1.84

1.29

2.47

38.5

0.30

185

KM-21-32

342.9

345.9

3.0

0.67

0.52

2.70

13.0

0.15

190

KM-21-32

358.9

368.4

9.4

0.60

1.47

1.99

45.7

0.35

195

KM-21-33

171.3

172.5

1.2

3.79

0.45

0.21

63.0

0.17

150

KM-21-34

299.3

303.9

4.6

0.29

1.69

0.94

46.3

0.26

205

KM-21-34

309.7

310.9

1.2

2.27

0.56

1.55

19.9

0.08

210

KM-21-35

609.6

615.1

5.5

0.92

1.26

1.71

57.7

0.02

550

including

609.6

613.0

3.4

1.39

1.69

1.98

54.0

0.01

 

KM-21-38

406.5

407.8

1.4

0.60

1.08

9.41

4.0

0.25

345

KM-21-38

467.4

476.1

8.7

0.09

1.73

3.87

61.1

1.22

370

including

470.0

475.2

5.2

0.12

2.44

5.68

87.5

1.79

 

KM-21-40

589.8

613.8

24.0

4.98

0.61

0.98

23.4

0.45

550

including

589.8

597.9

8.1

7.63

0.43

0.39

27.1

0.17

 

KM-21-40

627.9

680.8

52.9

0.47

2.91

3.40

35.7

0.40

590

including

641.1

648.3

7.2

1.15

7.66

8.27

88.5

0.92

 

including

670.3

674.1

3.8

1.53

10.89

9.47

24.6

0.61

 

KM-21-41

462.6

559.3

96.7

1.04

1.54

2.66

40.8

0.35

420

including

503.2

514.2

11.0

0.99

5.34

8.17

106.3

1.63

 

including

546.7

558.1

11.4

5.86

5.83

3.24

185.4

0.04

 

including

553.1

556.9

3.8

7.11

9.55

5.70

505.8

0.09

 

KM-21-43

583.7

586.4

2.7

1.07

1.60

4.82

5.7

0.02

550

KM-21-43

594.4

607.1

12.7

0.32

0.08

4.97

3.2

0.03

555

including

598.9

599.8

0.9

0.50

0.18

11.30

3.0

0.03

 

KM-21-43

616.0

633.1

17.1

1.81

0.17

0.14

8.2

0.03

570

including

631.2

633.1

1.8

6.30

0.61

0.09

25.0

0.01

 

KM-21-44

353.4

377.3

23.9

0.34

0.97

2.52

18.3

0.33

185

including

354.0

356.6

2.6

0.23

2.14

7.97

38.9

0.68

 

Table 2. Results of Phase 1 Drill Program at Kay Mine, Yavapai County, Arizona. The true width of mineralization is estimated to be 50% to 97% of reported core width, with an average of 80%.

Arizona Metals Kay Mine Drill Intercepts

Analyzed Grade

Hole ID

From m

To m

Length m

Cu %

Au g/t

Zn %

Ag g/t

Pb %

Vertical

Depth Below

Surface m

KM-20-01

275.8

281.5

5.6

0.57

0.48

1.20

11.6

0.18

156

including

275.8

276.5

0.6

0.50

1.22

5.04

32.0

0.73

 

including

279.8

281.5

1.6

1.21

0.98

1.49

22.6

0.23

 

KM-20-02

297.8

300.8

3.0

0.77

0.20

0.04

1.4

0.01

172

KM-20-03

256.3

259.1

2.7

3.40

1.01

0.65

69.6

0.09

120

including

256.3

257.3

0.9

7.42

1.79

1.11

56.0

0.17

 

KM-20-03

292.2

292.6

0.5

2.43

0.19

0.15

2.0

0.04

152

KM-20-03

295.4

295.8

0.5

1.35

0.80

0.91

6.0

0.06

154

KM-20-03A

252.4

256.9

4.6

3.70

2.55

0.27

35.6

0.03

122

including

252.4

253.1

0.8

9.74

6.34

0.40

164.0

0.11

 

KM-20-05

266.6

269.0

2.4

6.47

1.94

0.57

43.3

0.14

150

including

266.6

267.8

1.2

10.60

2.21

1.05

50.0

0.26

 

KM-20-06

267.9

281.5

13.5

1.02

0.85

1.23

45.6

0.30

158

including

267.9

268.4

0.5

1.54

2.20

6.10

31.0

0.81

 

including

276.6

281.5

4.9

1.86

0.87

1.96

92.1

0.42

 

including

280.0

281.0

1.1

3.22

1.03

0.64

340.0

0.04

 

KM-20-09

588.1

588.4

0.3

0.91

1.74

1.86

15.0

0.40

 

KM-20-09

613.4

614.1

0.7

0.90

1.81

1.04

10.0

0.08

 

KM-20-09

614.6

614.9

0.3

2.64

0.36

0.98

19.0

0.10

 

KM-20-09

632.8

638.9

6.1

0.12

4.18

8.02

41.7

0.82

575

including

633.6

637.9

4.4

0.15

5.46

9.06

33.1

0.50

 

including

636.9

637.9

1.1

0.17

9.77

14.65

68.0

0.78

 

KM-20-10

563.6

568.5

4.9

2.39

2.16

3.27

24.9

0.31

490

including

563.6

566.6

3.0

3.66

2.42

3.16

28.2

0.32

 

including

567.2

568.5

1.2

0.33

2.52

5.10

28.4

0.43

 

KM-20-10

574.2

574.9

0.6

0.12

4.33

11.30

113.0

0.16

498

KM-20-10

577.7

579.3

1.6

0.03

0.70

4.38

45.9

0.68

500

KM-20-10

582.3

583.1

0.8

0.03

0.42

2.90

51.0

1.07

502

KM-20-10A

521.2

522.5

1.3

2.13

1.27

7.46

51.1

0.91

437

KM-20-10A

527.9

538.6

10.7

1.32

1.66

2.58

27.2

0.30

442

including

527.9

529.4

1.5

6.69

0.92

1.62

30.2

0.07

 

including

532.2

535.3

3.1

0.72

1.75

2.99

34.3

0.42

 

including

537.2

538.6

1.4

0.16

7.29

9.06

79.2

0.60

 

KM-20-10B

503.0

530.7

27.6

0.87

0.97

1.76

21.3

0.32

423

including

503.0

509.6

6.6

1.78

1.55

2.55

29.8

0.37

 

including

513.9

518.3

4.4

1.08

1.89

4.05

47.4

0.68

 

including

527.2

530.7

3.5

1.91

2.32

3.93

52.9

0.99

 

KM-20-10C

523.9

530.7

6.8

0.58

3.32

5.84

102.0

1.15

422

including

523.9

528.2

4.3

0.88

4.89

7.61

125.2

1.45

 

including

525.6

526.4

0.8

0.52

16.65

21.40

214.0

2.76

 

KM-20-11

554.1

556.9

2.7

4.14

2.83

3.56

70.0

0.28

490

KM-20-12

371.9

376.7

4.9

3.99

0.37

0.62

12.4

0.07

318

including

371.9

373.7

1.9

8.49

0.67

1.53

28.0

0.16

 

KM-20-12

379.5

405.4

25.9

0.73

0.08

0.08

2.3

0.01

326

KM-20-13

443.6

486.8

43.1

1.68

1.26

1.67

23.3

0.24

341

including

444.4

459.6

15.2

3.42

1.80

2.36

38.5

0.39

 

including

444.4

447.1

2.7

1.02

3.74

10.64

55.0

1.88

 

including

451.4

455.8

4.4

8.41

1.18

0.16

65.3

0.02

 

KM-20-14

421.7

461.6

39.9

1.47

1.00

1.67

18.4

0.19

314

including

426.3

429.8

3.5

9.56

1.28

0.95

30.0

0.07

 

including

457.2

460.7

3.5

0.36

2.58

8.33

26.3

0.38

 

KM-20-14A

404.6

409.0

4.4

1.67

1.48

2.50

79.2

0.41

303

including

404.6

406.4

1.7

4.08

2.46

5.02

173.6

0.53

 

KM-20-14A

421.0

443.5

22.5

0.86

0.72

1.51

15.9

0.18

312

including

421.0

421.8

0.8

9.81

2.91

1.69

45.0

0.19

 

including

421.0

425.0

4.1

3.23

1.14

1.30

21.4

0.14

 

KM-20-15

506.8

510.1

3.3

0.05

0.33

3.73

192.0

1.75

402

KM-20-16

480.4

518.8

38.4

0.85

0.81

2.24

24.3

0.25

385

including

480.4

492.9

12.5

1.63

1.98

4.23

48.5

0.50

 

including

480.4

483.4

3.0

2.40

4.74

7.49

77.9

0.91

 

including

489.8

492.9

3.0

3.61

2.59

6.90

100.7

0.92

 

Table 3. Locations of Phase 1 and 2 Program drill holes completed at Kay Mine, Arizona

Hole ID

Phase

Drill

Pad

Zone

Collar East

WGS84

Collar North

WGS84

Collar

Elev m

Collar

Az

Collar

Dip

Depth m

KM-20-01

1

Pad 1

North

392684

3769388

643

78

-48

335.3

KM-20-02

1

Pad 1

North

392684

3769388

643

75

-50

303.9

KM-20-03

1

Pad 1

North

392684

3769388

643

72

-43.3

365.8

KM-20-03A

1

Pad 1

North

392684

3769388

643

72

-43.3

321.0

KM-20-04

1

Pad 1

North

392684

3769388

643

65.1

-47.5

353.6

KM-20-05

1

Pad 1

North

392684

3769388

643

73.3

-47.2

348.7

KM-20-06

1

Pad 1

North

392684

3769388

643

81.3

-48.3

317.0

KM-20-07

1

Pad 1

North

392684

3769388

643

85.6

-47.6

307.8

KM-20-08

1

Pad 2

South

392638

3769266

653

91.1

-77.1

35.7

KM-20-09

1

Pad 2

South

392638

3769266

653

92.1

-77

670.6

KM-20-10

1

Pad 2

South

392638

3769266

653

96.3

-72.2

645.3

KM-20-10A

1

Pad 2

South

392638

3769266

653

96.3

-72.2

599.8

KM-20-10B

1

Pad 2

South

392638

3769266

653

96.3

-72.2

554.7

KM-20-10C

1

Pad 2

South

392638

3769266

653

96.3

-72.2

559.9

KM-20-11

1

Pad 3

North

392552

3769328

638

57.3

-67.5

652.6

KM-20-12

1

Pad 1

North

392684

3769388

643

95.7

-70.8

583.1

KM-20-13

1

Pad 1

South

392684

3769388

643

124

-66.5

523.6

KM-20-14

1

Pad 1

South

392684

3769388

643

133.6

-66

550.2

KM-20-14A

1

Pad 1

South

392684

3769388

643

133.6

-66

548.6

KM-20-15

1

Pad 2

South

392638

3769266

653

106.7

-66.8

572.1

KM-20-16

1

Pad 2

South

392638

3769266

653

91.5

-68.9

580.9

KM-21-17

2

Pad 2

South

392638

3769266

653

90.5

-59.5

892.5

KM-21-18

2

Pad 2

South

392638

3769266

653

89.8

-55

518.2

KM-21-18A

2

Pad 2

South

392638

3769266

653

89.8

-55

472.1

KM-21-19

2

Pad 1

North

392684

3769388

643

59.3

-69.5

481.6

KM-21-20

2

Pad 2

North

392638

3769266

653

53.7

-67.3

552.9

KM-21-21

2

Pad 1

South

392684

3769388

643

126

-70

561.4

KM-21-21A

2

Pad 1

South

392684

3769388

643

126

-70

556.3

KM-21-22

2

Pad 3

Grav

392552

3769328

638

33

-63

724.8

KM-21-22A

2

Pad 3

Grav

392552

3769328

638

33

-63

693.7

KM-21-23

2

Pad 1

South

392684

3769388

643

114.2

-66.3

527.6

KM-21-24

2

Pad 1

South

392684

3769388

643

119

-75.1

623.0

KM-21-25

2

Pad 3

South

392552

3769328

638

80

-77.4

775.4

KM-21-25A

2

Pad 3

South

392552

3769328

638

80

-77.4

745.8

KM-21-25B

2

Pad 3

South

392552

3769328

638

80

-77.4

737.9

KM-21-26

2

Pad 1

South

392684

3769388

643

118.2

-79.3

616.0

KM-21-27

2

Pad 1

South

392684

3769388

643

90.4

-86.7

858.9

KM-21-27A

2

Pad 1

South

392684

3769388

643

90.4

-86.7

817.5

KM-21-27B

2

Pad 1

South

392684

3769388

643

90.4

-86.7

823.0

KM-21-28

2

Pad 3

South

392552

3769328

638

86.7

-70.5

774.5

KM-21-29

2

Pad 1

South

392684

3769388

643

108.5

-54

488.6

KM-21-30

2

Pad 4

Far North

392733

3769870

630

71.4

-53

538.9

KM-21-31

2

Pad 2

South

392638

3769266

653

115

-62

617.5

KM-21-32

2

Pad 1

South

392684

3769388

643

115

-45.6

495.9

KM-21-33

2

Pad 4

Far North

392733

3769870

630

106.5

-53

457.5

KM-21-34

2

Pad 1

North

392684

3769388

643

81

-59

430.1

KM-21-35

2

Pad 2

South

392638

3769266

653

102.5

-78.5

715.7

KM-21-36

2

Pad 4

Far North

392733

3769870

630

132

-50

349.9

KM-21-37

2

Pad 4

Far North

392733

3769870

630

20

-75

489.5

KM-21-38

2

Pad 1

N&S

392684

3769388

643

109.2

-71.8

553.8

KM-21-39

2

Pad 4

Far North

392733

3769870

630

355

-71

426.7

KM-21-40

2

Pad 2

South

392638

3769266

653

72.5

-80.4

741.9

KM-21-41

2

Pad 1

N&S

392684

3769388

643

112

-77

609.6

KM-21-43

2

Pad 1

N&S

392684

3769388

643

103.5

-83.8

686.4

KM-21-44

2

Pad 1

South

392684

3769388

643

124

-42.8

431.3

About Arizona Metals Corp

Arizona Metals Corp owns 100% of the Kay Mine Property in Yavapai County, which is located on a combination of patented and BLM claims totaling 1,300 acres that are not subject to any royalties. An historic estimate by Exxon Minerals in 1982 reported a “proven and probable reserve of 6.4 million short tons at a grade of 2.2% copper, 2.8 g/t gold, 3.03% zinc, and 55 g/t silver.” The historic estimate at the Kay Mine was reported by Exxon Minerals in 1982. The historic estimate has not been verified as a current mineral resource. None of the key assumptions, parameters, and methods used to prepare the historic estimate were reported, and no resource categories were used. Significant data compilation, re-drilling and data verification may be required by a “qualified person” (as defined in National Instrument 43-101 – Standards of Disclosure for Mineral Projects) before the historic estimate can be verified and upgraded to be a current mineral resource. A qualified person has not done sufficient work to classify it as a current mineral resource, and Arizona Metals is not treating the historic estimate as a current mineral resource.

The Kay Mine is a steeply dipping VMS deposit that has been defined from a depth of 60 m to at least 900 m. It is open for expansion on strike and at depth.

The Company also owns 100% of the Sugarloaf Peak Property, in La Paz County, which is located on 4,400 acres of BLM claims. Sugarloaf is a heap-leach, open-pit target and has a historic estimate of “100 million tons containing 1.5 million ounces gold” at a grade of 0.5 g/t (Dausinger, 1983, Westworld Resources).

The historic estimate at the Sugarloaf Peak Property was reported by Westworld Resources in 1983. The historic estimate has not been verified as a current mineral resource. None of the key assumptions, parameters, and methods used to prepare the historic estimate were reported, and no resource categories were used. Significant data compilation, re-drilling and data verification may be required by a qualified person before the historic estimate can be verified and upgraded to a current mineral resource. A qualified person has not done sufficient work to classify it as a current mineral resource, and Arizona Metals is not treating the historic estimate as a current mineral resource.

Qualified Person and Quality Assurance/Quality Control

All of Arizona Metals’ drill sample assay results have been independently monitored through a quality assurance/quality control (“QA/QC”) protocol which includes the insertion of blind standard reference materials and blanks at regular intervals. Logging and sampling were completed at Arizona Metals’ core handling facilities located in Anthem and Black Canyon City, Arizona. Drill core was diamond sawn on site and half drill-core samples were securely transported to ALS Laboratories’ (“ALS”) sample preparation facility in Tucson, Arizona. Sample pulps were sent to ALS’s labs in Vancouver, Canada, for analysis.

Gold content was determined by fire assay of a 30-gram charge with ICP finish (ALS method Au-AA23). Silver and 32 other elements were analyzed by ICP methods with four-acid digestion (ALS method ME-ICP61a). Over-limit samples for Au, Ag, Cu, and Zn were determined by ore-grade analyses Au-GRA21, Ag-OG62, Cu-OG62, and Zn-OG62, respectively.

ALS Laboratories is independent of Arizona Metals Corp. and its Vancouver facility is ISO 17025 accredited. ALS also performed its own internal QA/QC procedures to assure the accuracy and integrity of results. Parameters for ALS’ internal and Arizona Metals’ external blind quality control samples were acceptable for the samples analyzed. Arizona Metals is not aware of any drilling, sampling, recovery, or other factors that could materially affect the accuracy or reliability of the data referred to herein.

The qualified person who reviewed and approved the technical disclosure in this release is David Smith, CPG, a qualified person as defined in National Instrument 43-101–Standards of Disclosure for Mineral Projects. Mr. Smith supervised the preparation of the scientific and technical information that forms the basis for this news release and has reviewed and approved the disclosure herein. Mr. Smith is the Vice-President, Exploration of the Company. Mr. Smith supervised the drill program and verified the data disclosed, including sampling, analytical and QA/QC data, underlying the technical information in this news release, including reviewing the reports of ALS, methodologies, results, and all procedures undertaken for quality assurance and quality control in a manner consistent with industry practice, and all matters were consistent and accurate according to his professional judgement. There were no limitations on the verification process.

Disclaimer

This press release contains statements that constitute “forward-looking information” (collectively, “forward-looking statements”) within the meaning of the applicable Canadian securities legislation, All statements, other than statements of historical fact, are forward-looking statements and are based on expectations, estimates and projections as at the date of this news release. Any statement that discusses predictions, expectations, beliefs, plans, projections, objectives, assumptions, future events or performance (often but not always using phrases such as “expects”, or “does not expect”, “is expected”, “anticipates” or “does not anticipate”, “plans”, “budget”, “scheduled”, “forecasts”, “estimates”, “believes” or “intends” or variations of such words and phrases or stating that certain actions, events or results “may” or “could”, “would”, “might” or “will” be taken to occur or be achieved) are not statements of historical fact and may be forward-looking statements. Forward-looking statements contained in this press release include, without limitation, statements regarding drill results and future drilling and assays, the resumption of drilling and the effects of the COVID-19 pandemic on the business and operations of the Company. In making the forward- looking statements contained in this press release, the Company has made certain assumptions. Although the Company believes that the expectations reflected in forward-looking statements are reasonable, it can give no assurance that the expectations of any forward-looking statements will prove to be correct. Known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking statements. Such factors include, but are not limited to: availability of financing; delay or failure to receive required permits or regulatory approvals; and general business, economic, competitive, political and social uncertainties. Accordingly, readers should not place undue reliance on the forward-looking statements and information contained in this press release. Except as required by law, the Company disclaims any intention and assumes no obligation to update or revise any forward-looking statements to reflect actual results, whether as a result of new information, future events, changes in assumptions, changes in factors affecting such forward- looking statements or otherwise.

NEITHER THE TSX VENTURE EXCHANGE (NOR ITS REGULATORY SERVICE PROVIDER) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE

Not for distribution to US newswire services or for release, publication, distribution or dissemination directly, or indirectly, in whole or in part, in or into the United States

Contacts

Marc Pais
President and CEO Arizona Metals Corp.
(416) 565-7689
mpais@arizonametalscorp.com
www.arizonametalscorp.com
https://twitter.com/ArizonaCorp

Contacts

Marc Pais
President and CEO Arizona Metals Corp.
(416) 565-7689
mpais@arizonametalscorp.com
www.arizonametalscorp.com
https://twitter.com/ArizonaCorp