Adam Opel AG Introduces New Lightweight Design Strategy benefiting from ESI PAM-STAMP

ESI’s Simulation Software Enables Accurate Prediction of Distortion of Advanced High Strength Steel, from Early Design Stages

(Photo: Business Wire)

PARIS--()--ESI Group (Paris:ESI), leading innovator in Virtual Prototyping software and services for manufacturing industries, supports Adam Opel’s new lightweight design strategy with its stamping simulation software ESI PAM-STAMP. By detecting part distortion early in the design process, Opel is now able to efficiently counteract distortion of stamped parts made of Advanced High Strength Steel (AHSS). The new process, supported by PAM-STAMP, leads to improved part quality, while delivering important weight reductions that translate into a lower carbon footprint for Opel’s vehicles.

Subject to new regulations around CO2 emissions, the automotive industry must come up with innovative solutions to produce lighter weight vehicles that require less fuel while maintaining, and preferably improving, occupant safety levels. Replacing existing steel grades with thinner Advanced High Strength Steel (AHSS) grades is a promising option as these offer performance flexibility, lower cost and reduced weight. However, AHSS presents a major disadvantage in the manufacturing process as the high yield strength can be associated with considerable springback and twisting after forming.

To overcome this manufacturing challenge, German automotive manufacturer Adam Opel AG recently ran an engineering project in collaboration with Thyssen Krupp System Engineering and ESI Group. The team developed a design approach in which a geometrical stiffness was induced through a double-S profile in the punch radius of metal forming tools. Replacing the original punch radius with a double-S profile, the team proceeded to precisely determine the influence of the size and shape of the punch on the wall opening, springback and twisting behavior of the final part.

The Opel team then investigated the influence of blankholder pressure using PAM-STAMP, and determined the combination of punch radii and blankholder pressure, that delivered the smallest possible deviation from the nominal part shape. Contrary to initial expectations, the team discovered that a decrease in blankholder pressure reduced the deviations.

To verify the results, Adam Opel AG produced the actual tools and compared the physical try-out test data with the results obtained using PAM-STAMP simulation. The results were in excellent agreement, for both trimmed and untrimmed geometries, and clearly showed the impact of geometrical modifications on wall opening, bending springback and twisting. Based on these results, Opel decided to proceed with further investigation of the use of AHSS grades in their manufacturing processes.

“This project was a major success due to the close collaboration between Opel, Thyssen Krupp System Engineering and ESI. It helped us predict and control the distortions, resulting in an efficient compensation of stamped parts using Advanced High Strength Steels (AHSS). We were able to tackle the challenges related to the model’s geometry and its use within an intensive context, such as optimization,” said Dr. Niels Koch, Project Leader for Advanced Manufacturing Technologies, at Adam Opel AG.

For more information about ESI PAM-STAMP, please visit

Read more success stories from ESI customers:

Join ESI’s customer portal myESI to get continuously updated product information, tips & tricks, view the online training schedule and access selected software downloads:

For more ESI news, visit:

For additional information, please feel free to contact our international communications team:

North America

Natasha Petrous

+1 248 3818 661


Germany, Austria, Switzerland

Alexandra Lawrenz

+49 6102 2067 183


South America

Daniela Galoflo

+55 11 3031 6221


United Kingdom

Kim Melcher

+44 1543 397 905


Maddalena Marinucci

+39 051 633 5577


Nozomi Suzuki

+81 363818486



Gaëlle Lecomte

+33 4 7814 1210


Eastern Europe

Lucie Sebestova

+420 511188875


Monica Arroyo Prieto

+34 914840256



Natalia Nesvetova

+7 343 311 0233

South Korea

Gyeong Hee Lee

+822 3660 4507



Yuxiang Guo

+86 (0)10 18500685938


About ESI Group

ESI Group is a leading innovator in Virtual Prototyping software and services. Specialist in material physics, ESI has developed a unique proficiency in helping industrial manufacturers replace physical prototypes by virtually replicating the fabrication, assembly and testing of products in different environments. Today, coupled with Virtual Reality, animated by systems models, and benefiting from data analytics, Virtual Prototyping becomes immersive and interactive: ESI’s clients can bring their products to life, ensuring reliable performance, serviceability and maintainability. ESI solutions help world-leading OEM’s and innovative companies make sure that their products will pass certification tests - before any physical prototype is built - and that new products are competitive in their market space. Virtual Prototyping addresses the emerging need for products to be smart and autonomous and supports industrial manufacturers in their digital transformation.

Today, ESI’s customer base spans nearly every industry sector. The company employs about 1200 high-level specialists worldwide to address the needs of customers in more than 40 countries. For more information, please visit


ESI Group – Media Relations
Céline Gallerne, +33 1 41 73 58 46

Release Summary

ESI Group, leading innovator in Virtual Prototyping for manufacturing industries, supports Adam Opel’s new lightweight design strategy with its stamping simulation software ESI PAM-STAMP.



ESI Group – Media Relations
Céline Gallerne, +33 1 41 73 58 46