DUBLIN--(BUSINESS WIRE)--Research and Markets has announced the addition of the "Samsung LM101A Chip Scale Package LEDL: Manufacturing" report to their offering.
The LM101A is the first LED family from Samsung in chip scale packaging (CSP). These LEDs have been developed for indoor lighting applications, including bulb, candle, MR16, PAR and spotlight. The reference device that was analyzed, the SCP8TT78HPL1TLS06E, is a neutral white LED with CRI of 80 and flux of 64lm for a current of 150mA, emitting 140lm/W. With 64lm coming from 1.44mm2, the LM101A LED from Samsung offers high light density.
CSP LEDs are a new market, representing 0.8% of the LED market today, but which will be six times larger in 2021. This component gives Samsung a position in the CSP LED sector.
Samsung has developed CSP LEDs to minimize component area, reducing the footprint on the circuit board by up to 70%. Moreover, without substrates, these LEDs have lower thermal resistance.
Bringing together flip chip LEDs and silicone molding provides a wide beam angle in a very thin device.
The simplicity of the packaging, without substrate and wire bonding, explains the high reliability of the component and the very low cost of the packaging.
The LED die is manufactured with mature technology but some new advances have been observed that reduce the manufacturing cost. The noble metals were replaced by stacking standard metals and a dicing technique has been newly adapted to LEDs in order to increase the number of dies per wafer.
The report presents a deep technology analysis of the packaging and the components, with images of the epitaxial layer stack and electrode structure.
Key Topics Covered:
Overview / Introduction
- Reverse Costing Methodology
- Package views and dimensions
- Package cross-section
- Package process
- LED Die
- LED die view and dimensions
- LED die process
- LED die cross-section
- LED die cross-section cathode
- LED die cross-section anode
- LED die process characteristic
LED Manufacturing Process
LED Die Front-End Process
- LED Die Fabrication Unit
- Package Process flow
- Final Test and Packaging Fabrication unit
Synthesis of the Cost Analysis
- Main steps of the Economic Analysis
- Yield Hypotheses
- LED Front-End Cost
- LED Wafer Cost
- LED Wafer Cost by Process Step
- Back-End: Probe Test and Dicing Cost
- LED Die Cost
- Packaging and Final Test Cost
- Component Cost
For more information about this report visit http://www.researchandmarkets.com/research/lrlkc3/samsung_lm101a