OAKLAND, Calif.--(BUSINESS WIRE)--Digicom Electronics, Inc., a technology and quality driven electronics manufacturing services company, presents its new Diamond Track Defect Mitigation Services at the BIOMEDevice Show at the San Jose Convention Center, San Jose, CA, on December 7-8, 2016, in booth 327. The program incorporates Digicom’s proprietary Diamond Track nitrogen and cleaning services to reduce or eliminate defects in printed circuit boards, especially for mission critical products such as in the medical, military and aerospace, industrial, and RF wireless industries.
Digicom generates its own nitrogen to use in its solder reflow, selective soldering, and hand soldering manufacturing processes to strengthen the solder bonds and improve solder adhesion. Studies show a 50-60% reduction (as reported in TEquipment.net white paper) in defect levels when using nitrogen in the reflow process. Adding nitrogen minimizes device failures and ensures printed circuit board integrity.
“Adding nitrogen to the soldering process is not commonly done by EMS companies,” explained Mo Ohady, general manager of Digicom Electronics. “Companies that do add it, usually do so by renting or leasing nitrogen-containing cylinders that have to be delivered in a very cold, compressed form which is not suitable for use if you’re trying to maintain hot-zone stability in a reflow oven. Digicom has installed its own nitrogen generation system, producing the nitrogen and piping it through a safe, environmentally sound system so it can be used in all soldering processes – solder reflow, selective soldering, and hand soldering. Generation and on-location storage of nitrogen enable the system to have the exact amount of nitrogen it needs, eliminate temperature variability, and save money for the company, and therefore the customer.”
Digicom’s Diamond Track Cleaning process combines a combination of chemicals, temperature, wash cycles, timing, and equipment that results in printed circuit boards with superior quality and cleanliness. IPC-TM-650 best scenario ionic cleanliness guidelines specify an allowable level of contamination of 10-2 micrograms/in2 for military applications and 65-2 micrograms/in2 for general applications. Digicom consistently delivers better than that, with zero contamination levels, measured and verified by periodic tests done by independent labs.
Digicom helps companies with their complete process from design review through prototyping, component sourcing, manufacture, test, and process validation. Digicom is certified for ISO 9001:2008, ISO 13485:2003 medical devices quality, quality system regulation 21 CFR 820 , and ITAR certification. For more information or to arrange a meeting with Digicom at the BIOMEDevice Show or a visit at Digicom’s newly expanded facility at 7799 Pardee Lane, Oakland, CA 94621, contact Digicom Electronics at +1-510-639-7003, email firstname.lastname@example.org, or see our videos, articles, and information at www.digicom.org.
About Digicom Electronics
Digicom Electronics offers advanced electronics manufacturing with "Made in the USA” quality that fits the needs of larger enterprises while at the same time providing the benefits and individual attention needed to serve start-up companies. Digicom collaborates in all aspects of the process from the design for manufacturability to the final, fully compliant product. Material procurement and management services include planning, purchasing, expediting, and warehousing of components and materials. Digicom has ISO 9001:2008, ISO 13485:2003 medical devices quality, quality system regulation 21 CFR 820, ITAR, and numerous other certifications. For more information follow us at www.twitter.com/DigicomEMS, visit www.digicom.org, call +1.510.639.7003, or e-mail email@example.com.