General Micro Systems SD19 Smart Display Passes MIL-S-901D Shock Test

19-inch RuggedView™ smart LCD display remains intact and fully operational after hammer test of over 500Gs force

RANCHO CUCAMONGA, Calif.--()--General Micro Systems, Inc. (GMS), the industry-leading expert in highest-density, compute-intensive, and rugged small form-factor embedded computing systems, servers, and switches for C4ISR defense, aerospace, medical, industrial, and energy exploration, announces the SD19 rugged smart display has successfully passed rigorous MIL-S-901D shock testing.

Simulating an explosion or a projectile hit, the MIL-S-901D “High-Impact Shipboard Machinery, Equipment, and Systems” specification is notoriously difficult to pass. A heavy hammer strikes a test fixture onto which the SD19 unit under test (UUT) is mounted. Subject to hundreds of Gs of force, or more, metal can deform, glass can break, switches and covers can fly off, and components can be ripped from printed circuit boards.

To accurately measure the effects of shock waves in all three axes, accelerometers are installed on the test fixture and no dampening or any other shock-mitigation mechanism is allowed. The UUT receives the full impact force transmitted. Nonetheless, subjected to the 5-foot, 400-pound “hammer test,” the GMS SD19 standard-definition, 19-inch smart LCD with integrated 4th Generation Intel® Core® i7 Processor workstation remained fully operational. The result was not a surprise: the SD19 was designed ground-up to survive excessive punishment.

“The ‘hammer test’ is brutal,” said GMS CEO and chief architect Ben Sharfi. “Rigidly mounted in a test fixture, our display was slammed over and over again by a 400-pound hammer from five feet in the air. The noise of the strike was deafening and its impact shook the ground, but throughout the test the SD19 remained not only intact but completely operational.”

Test results show shock in excess of 500Gs transmitted to the SD19, and a hand-shot video recorded the tests; actual instrumented data proves the results (x-axis 552G; y-axis 102G; z-axis 326G). The test suite was conducted in conjunction with a GMS customer and its military customer representative as part of a program qualification of the SD19 rugged smart display. Actual test conditions were in compliance with MIL-S-901D, Grade A, Class 1, Type A, Unrestricted Orientations, Operational.

Part of General Micro Systems’ RuggedView™ smart display product line, the SD19 is a standard-definition ultra-dense, super-rugged smart display combined with a workstation computer subsystem in a single, conduction-cooled chassis. The 16.9-inch (wide) by 19-inch (high) GMS SD19 smart display with Intel-based single board computer is less than 3.5 inches thick and is passively conductively cooled. Competing products with similar functionality measure up to 8 inches thick and use one or more fans. Fans are known causes of failure and reduced MTBF in defense systems, and they rarely survive MIL-S-901D shock testing.

The GMS SD19 is thin because of the company’s patent-pending RuggedCool℠ technology, which allows “mix and match”, densely packed modular boards that conduct heat from the Intel Core i7® processor directly to the SD19 case. Depending on the mounting location, heat from the SD19 is either radiated into the environment or conducted away from the unit via mounting hardware.

“Modular design plays a key role in the ruggedness of the SD19,” added Sharfi. “This means that as we update and extend this product family to new processors and technologies, it will continue to offer customers the same outstanding shock and thermal protection.”

The SD19 RuggedView™ smart display has a hardened 4:3 aspect-ratio touchscreen and an LCD with finely controlled, military-specified brightness settings from full on to complete dimmed darkness. In addition, the SD19 supports multi-display operation that enables output to other displays and input from other systems with the push of a bezel button.

For more information regarding GMS products, please visit www.gms4sbc.com

Additional press materials can be found at: http://www.gms4sbc.com/news/shocktest

Reader Service Contact: Jonathan Malaney, 772-266-4015 ext. 402, jmalaney@gmseast.com

About General Micro Systems

GMS is an IEC, AS9100, and MIL-SPEC supplier with infrastructure and operations for long-life, spec-controlled, and configuration-managed programs. Products are designed from the ground up for extreme environments and can be found embedded in the harshest environments on the planet. The company’s key differentiator is density: super-dense functionality in rugged, small form-factor systems. This is made possible by patent-pending RuggedCool℠ cooling technology that starts at the processor plus intellectual-property software specifically geared for COTS systems with the highest SWaP-E, where “E” is price, performance, and I/O efficiency. GMS is also the leader in deployable high-end Intel® processors and is a proud Intel partner since 1986.

General Micro Systems and the General Micro Systems logo are trademarks of General Micro Systems, Inc. All other product or service names are the property of their respective owners. © 2016 General Micro Systems, Inc. All Rights Reserved.

Contacts

Hughes Communications, Inc.
Angie Hatfield, 425-941-2895
angie@hughescom.net

Release Summary

General Micro Systems’ 19-Inch RuggedView™ smart LCD display remains fully operational and intact after hammer test of over 500Gs force, successfully passing rigorous MIL-S-901D shock testing.

Contacts

Hughes Communications, Inc.
Angie Hatfield, 425-941-2895
angie@hughescom.net